§ 5.08.040. Industrial sewer service.

A.

For purposes of this Chapter, Industrial sewer customers shall be defined as those non-domestic sewer customers not identified in Section 5.08.020 or Section 5.08.030, and those customers that purchased Capital Capacity [remitted Capital Capacity Reimbursement Fees] based on the EDU Formula in Section 5.08.060(B)(4)(c) of this Chapter.

B.

The sewer service fee for Industrial sewer customers shall be the product of the Sewer Service Charge Rate and the sum of total Domestic EDUs and Industrial EDUs discharged, divided by the number of calendar days for the billing period.

1.

Determination of Domestic EDU Contribution. Domestic EDU contribution from the Industrial sewer customer shall be calculated per Category I of Section 5.08.030(A).

2.

Determination of Industrial EDU Contribution. Industrial EDU contribution shall be calculated using the following EDU formula.

Where:

Q = Industrial wastewater flow to sewer for the billing period (measured in gallons)

BOD = Biochemical Oxygen Demand (mg/l)

TSS = Total Suspended Solids (mg/l)

_____

3.

Industrial sewer customers shall be monitored by the District to collect representative data with regard to wastewater discharge BOD, TSS and Flow, adequate for determination of industrial sewer service fees. Industrial sewer customers shall be required to provide and maintain requisite facilities and equipment for that purpose.

In cases where direct sewer flow monitoring or wastewater quality monitoring is not feasible, the General Manager may approve methods for estimation. Such methods shall be documented and enforced in a Non-domestic Sewer Discharge Permit issued per Title 6 of the District Code.

( Ord. No. 32-D, § 2(Exh. A), 4-22-2014 )